气动扳手运行的标准气压是在8kg以上，在保证各部分零件正常的情况下，我们可以直接打开电源开关使用迷你风扳。哪么使用迷你风扳具体怎样操作？要注意哪些？ The standard air pressure of the pneumatic wrench operation is more than 8kg, in the case of ensuring the normal parts, we can directly open the power switch to use the mini wind wrench. How to use the mini wind wrench? What should I pay attention to?

1: The mini wind switch pays attention to the orientation of the reversing switch before operation, so as to understand the rotation direction when operating the intake valve.

2: It is necessary to ensure that the compressed air entering the mini pneumatic motor is clean and dry air with a maximum atmospheric pressure of 6.0bar. Otherwise, it may inevitably lead to risk scenes such as transmission system problems, speeding, cracking, and output torque errors.

3: Ensure that all hoses and other connecting equipment size is correct, equipment strong; Do not use damaged, worn or aged air hoses and other connecting equipment; It is advocated that an urgent closed valve should be equipped on the gas supply line, and its equipment orientation should be known to others.

4: Before operating the machine, it is necessary to check whether there is enough smooth oil in the oil cup. In the case of short or no smooth, it will accelerate the wear speed of the air motor blade, resulting in the decline of the function of the things and the addition of protection operations.

5: The body posture is necessary to adhere to balance and stability, and do not fluctuate too much when operating this thing. As you open and operate things, prevent and be alert to sudden changes in torque and force during movement.

6: If the hose is faulty or the connection is cracked, the air insurance equipment of appropriate size can be used in the hose upstream equipment, and in the case of the hose internal connection, the stability equipment can be used through any hose connection to avoid the sway of the hose.

7: The thing is a torque thing with a reaction lever, and the huge torque of the machine is absorbed by the reaction lever, so it is necessary to find a support point for the reaction lever to meet the strength during operation. In view of safety considerations, it is necessary to stay away from the operating range of the reaction lever when the machine is operating, otherwise, it may/inevitably cause great damage to the human body.

8: Pneumatic torque wrench through the mechanical gear, air source processing components, power management system conditioning to complete the accurate control of torque, the operation is as follows: mechanical gear: check the torque table, adjust the shift knob to 1 gear or 2 gear.

Attention:

Do not load and unload pneumatic wrench socket and clean pneumatic wrench with wind.

All kinds of equipment without the consent of the responsible person, anyone is prohibited to start or supply air without authorization.

After all kinds of equipment is used up, remove the quick connector to clean it and keep it properly.

When using, do not overload, do not idling at high speed, to prevent premature mechanical wear.

It is necessary to inject smooth oil from the inner hole of the nozzle 3 to 4 times per shift, and use No. 20 oil in summer and No. 10 oil in winter.

If secondary impact is found in use, it should be stopped immediately for viewing, it is prohibited to disassemble on the scene (refers to the unclean place), and it should be sent to repair part of the repair in time.